Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
Brystar Tools

Phase II 900-331D Digital Rockwell Hardness Tester 900331D

$2,795.00 $2,515.00
(You save $280.00)

Phase II 900-331D Digital Rockwell Hardness Tester 900331D

$2,795.00 $2,515.00
(You save $280.00)
SKU:
900-331D
Weight:
242.00 LBS
Shipping:
$140.00 (Fixed shipping cost)
Special delivery options, such as lift gate delivery or residential delivery, may require an additional fee:

(Maximum Size: . Type: )
Quantity:
Share

Product Description

It's here!! Looking for a simple, easy to use, and inexpensive digital hardness tester? The model 900-331D would be worth a look. This new tester is complete with the best features of a digital tester and has the same ease of use as the best selling Phase II 900-331 analog hardness tester. This unit comes complete with an accessory kit that includes a nice variety of anvils, test blocks and indenters to have you up and testing right away. Backed by Phase II's five year warranty and lifetime technical support, the 900331D digital is a wise decision for your testing needs. The advanced digital indicator is easy to read and the major load is a breeze to select by way of the quick selector knob on the side of the neck. This tester is perfect for heat treat facilities, inspection labs, machine shops, knife makers, manufacturers, workshops, etc...

 

* $140.00 SHIPPING TO A BUSINESS ADDRESS IN CONTINENTAL USA ONLY (ADDITIONAL FEE MAY BE REQUIRED FOR SPECIAL SERVICES SUCH AS LIFT GATE SERVICE, RESIDENTIAL, UNIVERSITY, OR TRADE SHOW DELIVERY, ETC...). CALL OR EMAIL FOR SHIPPING QUOTE TO ALASKA, HAWAII OR OUTSIDE OF THE USA. 

 

nist-logo2.png     warranty-star.gif

 900-331-9500-digital-ind.png

 

900-331d-face-sm-no-print.png
 

 

Which scales can the 900-331D test in?

All of the regular Rockwell scales. A, B, C, D, E, F, G, H, L, M, P, R, S, V. Accessories are included to test in the more popular scales A, B, C. You would need to invest in the proper size ball penetrator to test in the less used scales, which we have available in our store.

 

What is the biggest part I can get in this tester?

This tester has a vertical capacity of 6.7" and a throat depth of 6.6" (from the center of the indenter to the face of the neck).

 

What is the thinnest part I can test in this tester?

This will depend on the hardness of your test part. Refer to our Hardness vs Minimum Thickness Chart .

If your part is too thin for a regular Rockwell hardness tester, you will need a Superficial Rockwell tester. Check out the Phase II model 900-345 for your Superficial testing needs. Also, we have a tester that is a combination of a regular and superficial tester all in one unit, commonly referred to as a "Twin Tester" model 900-375.

 

How easy is it to operate?

The 900-331D is simple to operate. First, select your desired scale. Place your part on the proper anvil, located on top of the elevation screw. Next, raise your test part up to the indenter until it touches. Then, watch the long arm on the dial as you raise the part. The long arm will travel through three revolutions while the small arm will advance to the red dot. Stop the long arm at the 12 o'clock "zero" position with the short arm on the red dot. Move the handle on the side to apply the major load. When the dial stops moving, return the handle back to the start position. Record your hardness reading from the dial. Lower the test part and you are done. In just a few simple steps, you get accurate readings with great repeatability.

 

What do I get in this package?

  • C scale Diamond Indenter
  • 1/16" Ball Penetrator
  • 3-HRC Test Blocks
  • 1- HRB Test Block
  • 1- HRA Test Block
  • Test Table 5.87" diameter (150mm)
  • Flat Anvil 2.5" Diameter (63mm)
  • Standard Vee Anvil
  • Accessory Case
  • Dust Cover

 

What optional accessories are available?

NIST/ASTM Certified Hardness Test Blocks, Diamond Indenters, Ball Penetrators and Test Kits.

 

Features:

  • Direct digital dial reading
  • Easy to operate
  • Automatic conversions to Brinell, Vickers, etc...
  • Engineered to obtain highly sensitive and accurate readings
  • Conforms to ASTM E18

 

 

Specifications:

  • Minor Load: 10Kgf
  • Major Load: 60, 100, 150Kgf
  • Test force application: Dead weight
  • Test Force Control: Hydraulic dashpot system
  • Result Display: Digital LCD
  • Vertical capacity: 6.7"
  • Throat depth: 6.6"
  • Height: 30"
  • Width: 8-1/2"
  • Depth: 20"
  • Shipping Weight: 242 lbs.

 

 Need more info on the various Rockwell Scales? Look no further. Rockwell Hardness Scale Chart

 

 

 

 

 

 

Warranty Information

Product Reviews

Find Similar Products by Category