Rush Machinery Drill & Tool Grinder 250A

Manufacturer: N/A
SKU:	250A

Price: $0.00

The Rush Machinery Model 250A incorporates wide capacity and versatility in an affordable package. The innovative design of the 250A allows for the grinding of almost any drill geometry (2,4,6,8&10 flutes), and most are completed in a single chucking. The versatility also extends to taps, reamers, countersinks and endmills. Many of these tools can be ground with very little change in setup.

Specifications - Models 250A

Capacity: 3/32" to 2" (2.5 to 51mm) diameter straight or taper shank
Drill Point Angles: 40 to 180+ degrees
Motor: TEFC 1/2 Hp, 115/230V, 60 hz, single-phase (standard on manual and semi-automatic versions). TEFC 1 Hp, 208-230/460V, 60 Hz, three-phase (standard on auto-infeed version; optional on manual and semi-automatic versions). 50 hz & other voltages are available.
Dimensions: 44" (118 cm) wide x 42" (107 cm) deep x 53" (135 cm) high.

The basic manual model is shown here and it is also available in semi-automatic and automatic infeed versions.

>> Call or email for a quote.

E-mail a friend about this item.

Return to Catalog

Brystar Tools | 222 AC Smith Road, Roxobel, NC 27872

Tel: (252) 344-2309 | Fax: (252) 344-2313 | Email: service@BrystarTools.com

Categories

Rush Machinery Drill & Tool Grinder 250A