Diamond Spot Anvil with a 3/4" shank for hardness testing. Made in USA.
The Diamond Spot Anvil is recommended for supporting thin, soft sheet metal. The center of the anvil has a flat polished diamond surface(9.5mm / 3/8in). As the sample deforms under test the load, this surface standardizes the frictional effect between the anvil and sheet metal. The diamond Spot anvil should only be used with a ball indenter on the Superficial rockwell scale. The Diamond Spot anvil must NOT be used with diamond indenters.
Diamond Spot Anvil with a 3/4" shank for hardness testing. Made in USA.
The Diamond Spot Anvil is recommended for supporting thin, soft sheet metal. The center of the anvil has a flat polished diamond surface(9.5mm / 3/8in). As the sample deforms under test the load, this surface standardizes the frictional effect between the anvil and sheet metal. The diamond Spot anvil should only be used with a ball indenter on the Superficial rockwell scale. The Diamond Spot anvil must NOT be used with diamond indenters.
Manufacturer: N/A
SKU: BTAN-06
